CMR Racing Products Inc.

CMR Racing Products Inc.

Sunday, 7 August 2016

CMR Successes at Phillip Island International Challenge near Melbourne Australia in January 2016 with the US Classic Racing Team

The US Classic Racing Team Captain Dave Crussell approached CMR about building some Yamaha FJ engined and Suzuki GS engined F1-XR69 frame, suspension, fuel tank and exhaust system kits in April of 2015.

CMR took on the challenge, despite the short time frames. The team required the frames ready to build into complete bikes so they could be tested and tuned ready to ship to Australia from Oakland, California on November 2, 2015.

The races took place from January 20th through to the 24th, 2016 and the US Team did very well considering stiff competition from Team UK and Team Australia.

Here are some pictures of the various Team USA racers. The first set of four photos is of USA Team Captain Dave Crussell's big Yamaha FJ.
Here is US Team Captain Dave Crussell's CMR framed Fi-FJ1250
ridden by US SBK Specialist Pat Mooney

Some close action in the International Challenge with John Allen #3 of Team UK,
Glen Richards #26 of Team Australia and Pat Mooney #7 Team USA

A nice picture of Dave Crussell's CMR-framed Yamaha F1-FJ1250
before the racing numbers were attached

The shipping deadline for Dave's Team USA bikes from Oakland, California
by sea was November 2, 2015 for January 2016 arrival in Melbourne

The next set of photos is of Eirik Nielsen's CMR-framed Yamaha F1-FJ1250.

Assembler of the pieces in Portland, Oregon, September 2015
is Joe Pethaud of Vicious Cycle

Here we have Eirik Nielsen, owner and racer of the CMR-framed F1-FJ1250
and his good friend Joe Pethaud of Vicious Cycle building the bike back home
in Portland Oregon
Eirik going out for practice

Some tuning has to be done here and Eirik's thinking about it

Early morning practice. Let's go!

Publicity shot for Eirik's sponsors

Getting down to the business of racing
Eirik posted the fastest speed  on the back straight at Phillip Island of any of the US Team racers - 276 kph,

The next photos are of Joe Weir, also of Portland, Oregon, and his CMR-framed Suzuki XR69/GS1261 race bike.

October 27, 2015

Practice at Thunder Hill in California. Joe is really smokin'

Joe built the prettiest bike and raced it very well
Joe's picture-perfect bike captured a lot of attention in the paddock
which is where it resided most of the weekend due to a dropped valve in the engine.
Since Joe had been part of the team for a couple of years, he brought
his #2 bike, his Suzuki Katana. Joe will return to PI in 2017 with renewed vigour.

Sunday, 27 March 2016

More News from Down Under

Phil Harris. a Suzuki racer from years past,  of Sidney Australia, took delivery of our CMR Suzuki TR750 frame, swing arm, fuel tank and expansion chamber kit in October 2013. We are pleased to report the successful completion of Phil's project. With help from many of his friends including racer/tuner Clive Carter, the bike and engine were developed over two years. In January 2016, at the Phillip Island International Classic and in March at the Barry Sheene Memorial Races in Sidney, they achieved their best results.

Clive Carter who had helped Phil in the assembly and development of the bike convinced Phil to allow his son who was a modern Superbike racer, to try the classic racing Suzuki. Danny Carter, #25, Clive's son, achieved a fabulous result with the Phil Harris team, using the CMR Suzuki TR750 chassis.

The CMR Racing Products Team congratulates Phil, Clive and Danny on a well-deserved third overall podium finish in the P5-750 class at the Barry Sheene races in March 2016.

Here are a few photos of the bike during its assembly and final racing setup.

CMR Racing Products Inc. has produced and delivered over thirty of these CMR Suzuki TR750 frame kits for use with the GT750 engine. There are many enthusiasts around the world producing special parts for this engine; CMR would like to congratulate Phil Harris on achieving the best results to date with this frame and engine combination. 

We're getting to know interesting folks who are producing pieces for this engine. At Barber International Raceway in 2008, Denis met Kris Bernstein of Suzuki Yesteryear, who has been collecting information on all the modifications needed to convert the GT750 engine to a 130plus horsepower power-plant. Another enthusiast, Peter Anderson, who races vintage side-car outfits in New Zealand, has been very helpful in providing an updated version of the dry clutch and clutch operation system for this engine. You can contact Peter at this email address.

As  Phil Harris updates us with his successes, we will be sure to pass them on .

For more information on frame kits and fuel tank kits produced by CMR Racing Products Inc., contact Denis at and be sure to visit us on Facebook.

Sunday, 6 March 2016

News from Down Under

It's been too long since we posted. But our excuse is - we've been incredibly busy! The CMR Team is very grateful for being so busy, thanks to all our customers from around the world.

We'd like to update our readers about successful events worldwide, stories of the many riders using our CMR Yamaha TZ750 frame and fuel tank kits. This post is just a sample.

We'll start with New couldn't be farther away from Canada. They're actually having summer!

Our great friends in New Zealand have sent us photos of their machinery, beautiful builds all. Alistair Wilton purchased the CMR-framed Yamaha TZ750 from Norm Randall of Australia. Here are some photos of how Alistair wanted his bike to look. What a great job you have done Alistair!

Also from New Zealand is a new customer, Norm MacDonald, who's building a CMR-framed Yamaha TZ750. He sent us these photos to share with you. This bike will be ready for competition in time for the Phillip Island races in January of 2017!

Next we'd like to talk about our Australian Team entrant into the 2016 Phillip Island International Classic in January.  This CMR framed Yahama TZ750 is owned by Phil and Roz Andrea and successfully raced by Marty Craggill. We'll tell you more in a later post but for now, here are some images.

This last photo shows Phil and Roz Andrea's Team. From left to right: Marty Craggill, Phil Andrea, Bill White & Roz Andrea.

Marty ran a very respectable 1.41 at the Phillip Island International Challenge in January 2016.  At the support races for the First World SBK Round at Phillip Island February 2016, he ran low 1.40s.

So at the Barry Sheene Memorial races in Sydney, Australia in March, we are hoping for high 1.30s, if conditions are favourable. Congratulations to Phil, Roz, Bill and Marty for an outstanding performance. And to my good friend Jon Cornwell of Ohlins Canada who was over there on the other side of the world, helping out with the latest Ohlins suspension settings on his buddy Marty Craggill's race bike .